Maintenance of the water fountain pump is of utmost importance if you want to extend the life of the concrete fountains. Experts believe that the water fountain pump is the heart of the water fountains. Using clean and clear water is the best way of keeping your water fountain pump in a good condition. If there are impurities in the water of the water fountains, it will adversely affect the performance of the water fountain pump. Most fountain water pumps are designed to work under the water.

One important point to keep in mind is to never start the water fountain pump when there is no water or very less water, this can damage the water fountain pump. If you find that the water fountain does not work then as a first aid you can try to submerse the water fountain pump in some warm water mixed in vinegar by doing so the warm water and vinegar will remove any unwanted deposits in the water fountain pump. If this still does not work then you can look inside and see if there are any debris stuck inside the water fountain pump.

Reading the user manual or the user documentation is advisable if you want to assemble or dismantle the water fountain pump, make sure that you go through all the steps methodically before you do so. If you are a owner of a Campania fountain then you would have got a user manual along with your water fountain, this will give you a detailed procedure on how to assemble and dismantle the water fountain pump. Always check if the main power supply is turned off before you dismantle the water pump.

When you are cleaning the water fountain you will need to follow a few basic steps. The first thing you need to do is read and understand the instruction manual. Remove the dirt or leaves or any residue from the water fountain pump before you unplug and take out the water fountain pump and remove the cover. Then check the user manual and see if you would need a screwdriver for this task.

If you find the cover for the water pump is attached with the help of screws, you can use a screwdriver and unscrew it and after this is done, keep the screws in a safe place for that they would not get lost because you will need them to put the cover back on the water pump. Slowly remove the impeller that is inside the water fountain, take extra care while doing this so that you do not damage any surrounding parts.

After you remove the impeller clean it using any of the cleaning products that is available, if you don’t get a cleaning product from the supermarket the you can try and get it from a hardware store. The most tiresome or boring job is cleaning the water fountain pump, this will have to be cleaned properly both from inside and out. You can use a soft toothbrush or a small brush that is meant for cleaning the water fountain pump.

After the cleaning is done, fit in the impeller and the cover back in their original places and use the screwdriver to screw all the screws. Make sure that you tighten all the screws and don’t leave any stone unturned. Place the water fountain pump in the water and check if it is working properly. This is a very ideal situation and you need some prior experience of cleaning and maintaining the pumps and other hardware of the water fountains.

For a layman, at time the task of cleaning and maintaining the water fountain may be difficult. Only try and open the water fountain pump will you are very confident that you can complete this task, otherwise it would be best to get a technician to do this. A fine technician will have the following:
o A good knowledge of the water fountain pumps.
o Plenty of experience in assembling and dismantling of water fountain pumps.
o Proper certifications
o Loads of work experience.

Carlton Locke is a professional home improvement mentor. He has a wide knowledge when it comes to the beautification of your homes, especially with the use of water fountains. He has been in this industry for quite a long time already. Check his website to know more about him and his recommended concrete fountains.